Displaying aircon, such as inverter,
split type, window type and window type inverter. Promotional signage should
attached at the bottom of the price tag. Energy guide at the left side. Price
tags are at the right side and are aligned vertically. And a proper spacing of
each mock-up.
1. Split type should be at both sides
of the panel. One side for inverters then non-inverters at the opposite side.
Window-type at the middle portion.
2. Price tags & Special signage’s
should be placed at the right side of the face cover/mock-up and should be
aligned vertically.
3. All face covers / mock-ups should
be neatly wrapped with plastic cover. No yellowish in color or missing control
panel. If there are any, this should be reported immediately to merchandising
for replacement from supplier.
4. Use only wires to hang the face
cover/mock-up at the aircon panel then metal rings for price tags.
5. Maintain proper spacing between
each mock-up. Remove those mock-ups without promodiser of 2 months. For Metro
Manila, return it to vendor with proper documentation. For VisMin, send a
letter to the supplier requesting to scrap the mock-ups.
No comments:
Post a Comment