Small Kitchen Appliance Guide to best Handling Thermal Pot

Optimum Thermal pot usage and handling

[caption id="attachment_1575" align="alignleft" width="608"] Thermal Pot[/caption]

For optimum safety when using your thermal pot, regardless all the manufacturer, many thermal pots can cause injury, burns and personal or property damage if certain safety precautions are not followed. Your omega thermal have been manufactured with your personal safety in mind. It is necessary to remember that since all glass is fragile by nature, it is subject to breakage. Therefore, it is of extreme importance that you adhere the following precautions and safety measure using thermal pots.

 

1. Do not disassemble your thermal pot or take the glass filler out unless it is damaged or broken. If the glass filler breaks, it will cause a loud noise, and liquid and glass fragments may be ejected which may cause serious physical damage.


2. Do not allow children to use this thermal pot under any circumstances. This is exclusively for the use of adults only.


3. Do not allow the base of your thermal pot to get loose with time. Check the base of your vacuum bottle periodically and tighten it in order to prevent burns or injury which may occurs if the base should become detached or come off suddenly. This precaution will also eliminate the internal infiltration of liquid.


4. Do not overtightened the stopper. However, after filing your thermal pot with liquid, check to make sure that there is no leakage or dripping of liquid through the stopper.


5. Do not use your thermal pot in a microwave oven, a conventional oven, or on a stove top – burner. Also, do not place your thermal pot on or near any direct heat source.


6. Do not put your thermal pot in an automatic dishwasher.

 

Thermal Pot Right way of usage

1. Pre – condition the vacuum flask by filling it with hot or cold water for several minutes before using it.


2. Fill the bottle completely to maintain the temperature for the longest time.


3. For your safety, pour the contents of the vacuum flask into the cup before drinking.


4. To eliminate odor on your thermal pot, clean it with baking soda and water. To clean the glass filler, use vinegar and water.


5. Use your omega thermal pot vacuum flask for juice, coffee, tea,lemonade, and other beverages.

 

Thermal Pot Wrong way of usage

1. Using the thermal pot vacuum without preconditioning it.


2. Fill the thermal pot bottle halfway.


3. Cleaning the thermal pot bottle with bleach of abrasives and submerge the thermal pot bottle in water.


4. Using the the thermal pot vacuum flask for carbonated drinks, milk or baby food. Also, don't use ice in an exposed glass.